Best House Dazzle Glo

Jewell Best House Dazzle Glo is an ultra-luxury, low-VOC, 100% acrylic latex exterior paint designed for high-end residential and commercial projects where superior performance and durability are required.

The product is formulated using advanced technology and ultra-premium ingredients to provide performance, durability, coverage and adhesion. It combines a radiant appearance with climate resistance, exceptional dirt pick-up resistance, moisture resistance, UV resistance, mould resistance and protection against peeling and cracking.

The highlights are Weather Guard Technology, Brighter Colour Technology, outstanding gloss, colour retention, outstanding hiding, anti-fungal performance and a new-look-for-longer proposition.

100% Acrylic Latex Emulsion

Radiant Appearance

Climate Resistant

Exceptional Dirt Pick-Up Resistance

Weather Guard Technology

Resists Peeling and Cracking

Brighter Colour Technology

Outstanding Gloss

Retains Colour

Outstanding Hiding

Moisture Resistant

Covers Hairline Cracks

Wind Resistant

Mould Resistant

UV Resistant

Anti-Fungal

Superior Adhesion

New Look For Longer

Planet Friendly

12 Years Warranty

Radiant Appearance, Climate Resistant, Exceptional Dirt Pick-Up Resistance, Moisture Resistant, UV Resistant, Mould Resistant, Resists Peeling and Cracking, Superior Adhesion, Outstanding Hiding, Retains Colour, Covers Hairline Cracks, New Look For Longer, Planet Friendly

Radiant Appearance, Climate Resistant, Exceptional Dirt Pick-Up Resistance, Weather Guard Technology, Resists Peeling and Cracking, Brighter Colour Technology, Outstanding Gloss, Retains Colour, Outstanding Hiding, Moisture Resistant, UV Resistant, Anti-Fungal

1. Complete cutting-in around corners, edges, windows, doors and architectural details using a brush.

2. Apply the first coat uniformly using a good-quality exterior roller, brush or spray.

3. Paint in manageable sections.

4. Maintain a wet edge to avoid lap marks.

5. Do not excessively spread the material.

6. Allow the first coat to dry fully before recoating.

1. Confirm that the first coat is completely dry.

2. Remove any minor surface nibs, dust or imperfections.

3. Apply the second coat using the same dilution and application method.

4. Maintain uniform film build and application direction.

5. Inspect the completed wall for uniform shade, gloss and coverage.

The label recommends two or more coats as desired. Additional coats may be required for deep colours, major colour changes or difficult substrates.

Jewell WaterTite Crack Filler (where required) → Jewell WaterTite Waterproof Wall Putty (where full-surface levelling is required) → Jewell Exterior Primer → Jewell Best House Dazzle Glo

All surfaces must be sound, dry and clean.

Remove oil, grease, dirt, mildew, curing compounds, form-release agents and other foreign substances.

Remove loose and flaking paint.

Scuff, sand or de-gloss smooth and glossy surfaces.

Repair imperfections, cracks and holes before priming.

Countersink nailheads, fill and sand smooth, and caulk openings where required.

1. Remove loose biological growth from the surface.

2. Where mildew is present, scrub with a mixture of 1 litre household bleach in 3-4 litres of warm water as specified on the label.

3. Rinse and allow the surface to dry.

4. Do not add detergent or ammonia to the bleach/water solution.

5. For broader Jewell system treatment, use an appropriate Jewell WaterTite Bio-Wash Fungicidal Cleaner where specified.

Do not apply primer or topcoat directly over active fungal, algal or mould growth.

Use Jewell WaterTite Crack Filler for stable, non-structural plaster cracks where appropriate within the approved Jewell exterior system.

1. Open the crack slightly to form a clean groove where required.

2. Remove loose plaster, dust and contaminants.

3. Ensure the crack is clean and dry.

4. Press the crack filler firmly into the groove using a putty knife, spatula or trowel.

5. Avoid leaving cavities or air pockets.

6. Level the repaired area with the surrounding surface.

7. Allow the repair to dry fully.

8. Lightly sand the repaired area after drying.

Structural, movement or recurring cracks, deep masonry cracks and hollow plaster require appropriate civil repair and should not be treated only with decorative crack filler.

For premium exterior levelling, Jewell WaterTite Waterproof Wall Putty may be used where required as part of the Jewell exterior system.

Surface Preparation

The plaster must be fully cured, stable and free from active dampness.

Lightly pre-wet bare cement plaster where required by the putty system.

The surface should be evenly moist but must not have standing or running water.

Mixing

Mix the putty with clean potable water in the ratio specified on the product pack or approved technical data.

Use a mechanical mixer to prepare a smooth, uniform and lump-free paste.

Prepare only as much material as can be used within its specified working time.

Do not add water after the putty has begun setting.

Application

1. Apply the first thin coat using a putty knife or steel trowel.

2. Allow the first coat to dry for approximately 4-6 hours.

3. Apply the second coat.

4. Keep the combined thickness of both coats within approximately 1.5 mm.

5. Allow the completed putty surface to dry thoroughly.

6. Lightly sand using 320-number or finer sandpaper.

7. Remove all sanding dust before applying primer.

Apply Jewell Exterior Primer over the completely dry, smooth and dust-free surface.

1. Stir the primer thoroughly before use.

2. Dilute only as specified on the primer product pack or latest approved technical data.

3. Apply one continuous and uniform coat using a brush, roller or spray.

4. Ensure complete coverage of corners, repairs and difficult areas.

5. Avoid excessive dilution and missed patches.

6. Allow the primer to dry completely before topcoat application.

7. Apply a second primer coat only where the substrate remains excessively porous or uneven in absorption.

For major colour changes or deep shades, the Best House Dazzle Glo label recommends tinting the primer approximately to the finish-coat colour.

Apply only when temperature is above 10°C and below 35°C.

Always paint on a dry surface.

Do not paint in direct sunlight.

Do not apply when the surface is wet from rain, dew or condensation.

Avoid application where weather conditions may prevent adequate drying.

Low temperature, high humidity, thick films or poor ventilation may prolong drying time.

1. Verify product name, shade/base and batch before use.

2. Stir the paint thoroughly until completely uniform.

3. Intermix containers of the same product where required to maintain colour and sheen uniformity.

4. For brush or roller, dilute with no more than 30-40% water.

5. For spray, dilute with no more than 40-50% water.

6. Do not over-dilute.

7. Use the same dilution ratio across the same continuous wall.

Low temperature, high humidity, thick films or poor ventilation may increase drying time.

High-end residential exterior projects

Commercial exterior projects

Exterior walls and façades

New or previously painted drywall

Wood

Cured plaster

Masonry

Concrete

Tilt-up surfaces

Block

Stucco

Other properly primed exterior surfaces

Best House Dazzle Glo may be applied on properly prepared exterior surfaces including:

Exterior plastered masonry walls

Concrete surfaces

Cured plaster

Exterior drywall

Wood after suitable priming

Other properly prepared exterior surfaces

The product should not be treated as a standalone waterproofing membrane for roofs, terraces, floors or other horizontal surfaces exposed to standing water.

Check for active water leakage, seepage or dampness.

Inspect for efflorescence or salt deposits.

Check for cracks, hollow plaster and loose or delaminated plaster.

Inspect for algae, fungus, mould or other biological growth.

Check old coatings for chalking, flaking, peeling or poor adhesion.

Inspect window junctions, pipe penetrations and other water-entry points.

All sources of water ingress should be permanently rectified before painting. Do not apply over active seepage, failed plaster or unresolved structural cracks.

Allow new stucco, plaster and masonry to cure for 30 days before painting.

Concrete, masonry and plaster pH must be 13.0 or lower as stated on the label.

The substrate must be sound, internally dry and free from loose aggregate.

Remove cement laitance, mortar splashes and construction residues.

Do not begin painting only because the curing period has elapsed; confirm surface dryness before coating.

Actual coverage and drying time may vary depending on substrate porosity, roughness, application method and site conditions.

Do not paint over active seepage or dampness.

Do not apply over unresolved structural cracks or hollow plaster.

Do not paint in direct sunlight.

Do not apply below 10°C or above 35°C.

Do not over-dilute or spread the paint too thin.

Maintain consistent dilution across a continuous wall.

Keep out of reach of children.

Protect from freezing.

Refer to the Material Safety Data Sheet for additional health and safety information.

1. Inspect the existing coating for adhesion, chalking, cracks, fungus and dampness.

2. Rectify water-ingress problems.

3. Remove loose, flaking and poorly adhered paint.

4. Wash and clean contaminants; allow the surface to dry completely.

5. Treat mildew and biological growth.

6. Repair stable non-structural cracks with an appropriate Jewell crack filler.

7. Repair damaged plaster using appropriate civil-repair material.

8. Apply putty only on repaired or uneven areas unless full levelling is required.

9. Sand repaired areas and remove dust.

10. Apply Jewell Exterior Primer over bare, repaired or porous areas.

11. Allow primer to dry completely.

12. Apply two or more coats of Best House Dazzle Glo using the label-specified drying interval.

Best House Dazzle Glo is an exterior decorative coating and should not be used as the sole waterproofing treatment on roofs, terraces, floors or other areas subject to standing water.

Inspect parapet tops, chajjas, ledges, channels and terrace-wall junctions for water accumulation.

Correct drainage and slope defects before painting.

Use an appropriate Jewell WaterTite waterproofing system on horizontal or continuously wet surfaces where required.

Clean spatter and equipment immediately with warm, soapy water.

Use remaining paint completely or dispose of it properly.

Dry, empty containers may be recycled where a recycling programme is available.

Inspect exterior walls periodically for cracks, water ingress, dirt, algae or other surface deterioration.

Use mild cleaning methods and avoid aggressive abrasion on the finished coating.

White paint can be tinted by adding colourants.

Colourant cost is extra.

The shade information: White and Bases.

For significant colour changes or deep shades, tint Jewell Exterior Primer approximately to the finish-coat colour.